Valcourt FP10 Lafayette, Installation Instructions Manual, Page: 46 / 53

45
Reference
in
Figure
42
.
Parts required. (The numbers in
brackets are the parts numbers used
by Security Chimneys)
Inner diameter 6 ″ Inner diameter 7 ″
1 ″
insulation
(ASHT+)
2 ″
insulation
(S2100+)
1 ″
insulation
(ASHT+)
2 ″
insulation
(S2100+)
A Anchor Plate (6SP) R NR R R
A Anchor Plate (6XSP) NR R NR NR
B Screws R R R R
C 6 ″ à 7 ″ Chimney adaptor
(6AW7)
NR NR R R
D 7 ″ Chimney adaptor, 1 ″
insulation to 2 ″ insulation
(7UCA)
NR NR NR R
TABLE 3 – LIST OF MANDATORY COMPONENTS
CHIMNEY
MANUFACTURER
MANDATORY COMPONENTS TYPE/BRAND
Selkirk

Ventilated roof flashing.

Must have rafter protectors at the roof level if
the chimney is enclosed at the attic level (see
section 4).
Ultra-Temp (UT),
Super Pro (SPR),
Super vent (JSC), Hart
& Cooley (TLC),
Sure-Temp (ST)
Security Chimney

Rafter protector at the roof level if chimney is
enclosed at the attic level (see section 4).

Requires insulated attic radiation shield unless
chimney is enclosed at the attic level.

Requires the use of a 6AW7 (Solid pack 1")
adapter for a ASHT+ of 7".

Requires the use of a 6AW7 and a 7UCA
adapter for the S-2100 of 7".
1" Solid Pack:
ASHT+,
2" Solid Pack : S-2100
Simpson Dura-Vent

Ventilated roof flashing.

Rafter protector at the roof level is chimney is
enclosed at the attic level (see section 4).
1" Solid Pack :
Dura Tech
ICC

Ventilated roof flashing.

Rafter protector at the roof level if chimney is
enclosed at the attic level (see section 4).
Excel 2100
American Metal

Chimney cannot be enclosed at the attic level.
AC Triple wall HS,
AC Triple wall HSS