14
1-
In order to replace the glass, use the following procedure;
2-
Remove the gasket (A) placed around the door frame and its adhesive.
3-
Remove the door overlay (B) held in place by 6 nuts (C)
4-
Remove the 4 glass retainers (D, E, F, G) held in place by the screws (H).
To install the new glass, follow the above steps in reverse order.
Figure 4
2.3.9 Glass Care – Cleaning
The FP 10 is designed to keep the glass clean under normal operating conditions. If the FP 10
is operated continuously with the combustion air controls closed, the glass will tend to get
dirty unless the fuel, firebox and glass are maintained at higher temperatures. To clean the
glass, there are a number of specially designed cleaners. Your authorized Valcourt dealer can
recommend a suitable cleaner which is available in your area. Regular household glass
cleaners will not clean creosote and they usually contain ammonia that may stain the glass
permanently.
WARNING: ONLY WASH THE GLASS WHEN IT’S COLD.
Summary of Contents for FP10 Lafayette
