31
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
P. 540-563-2000
F. 540-362-9800
www.valcom.com
Diagnostic Test #2 - Comprehensive Test (B-Model Only)
The clock hands will remain on these numbers for three minutes, and then the clock will revert to
displaying the accurate time.
Hour Hand Position
12
1
2
3
4
5
6
7
8
9
10
11
Time Since Clock Last Recieved Communication
Clock received communication within the last hour.
Clock received communication between 1 and 2 hours ago.
Clock received communication between 2 and 3 hours ago.
Clock received communication between 3 and 4 hours ago.
Clock received communication between 4 and 5 hours ago.
Clock received communication between 5 and 6 hours ago.
Clock received communication between 6 and 7 hours ago.
Clock received communication between 7 and 8 hours ago.
Clock received communication between 8 and 9 hours ago.
Clock received communication between 9 and 10 hours ago.
Clock received communication between 10 and 11 hours ago.
Clock received communication more than 11 hours ago.
--May signify a manufacturer default.
The purpose of Diagnostic #2 is to test the Movement
gearbox and electrical components of your clock.
Diagnostic #2 may be enabled by pressing the
diagnostic button twice. If the clock is performing
this diagnostic, then a green LED on the movement
will flash twice every three seconds. It will continue to
flash twice every three seconds until the diagnostic is
complete.
If the LED is lit a solid green:
The second hand will display the protocol and polarity
that was detected. See the table on the previous page
for details.
The minute hand will display the software version
number.
If the LED is flashing red:
The hour hand will display how much time has passed
since the clock last received a communication signal:
Red
Green
Button
LED
