background image

 

set.  THE MUSIC INPUT LEVEL FROM THE 
MUSIC SOURCE  SHOULD  BE LIMITED TO  
0.25VRMS MAXIMUM.  A SOURCE LEVEL 
GREATER THAN 0.25VRMS WILL RESULT IN 
PERMANENT DAMAGE TO THE 
BACKGROUND MUSIC AMPLIFIERS 
CONTAINED IN THE V-1109RTVA.  The music 
source should be connected to the V/G Pair on 
the connecting block for the Page Control Unit. 
 

OPERATION

 

This unit provides multi-zone page access 
provisions to appropriately interface with the 
telephone system being used.  A preamplifier 
conditions the audio from the telephone system 
tip and ring and provides a low impedance low 
level output to the desired page zone. 

 

Circuit Description

 

When a station user lifts his handset to make a 
page, the switchhook contacts in the telephone 
close the tip and ring to form a loop which returns 
battery back to turn on transistor Q1.  Transistor 
Q1 operates relay and logic circuits to return dial 
tone and lamp battery to the telephone set.  Logic 
circuits receive dialing information and operate 
relays and/or circuitry to provide a ringback tone 
and a one-way connection for the zone selected. 

TECHNICAL ASSISTANCE

 

When trouble is reported, verify that power is 
being supplied to the unit and there are no broken 
connections.  Be sure that the amphenol is 
secure in the back of the unit.  Check voltages for 
proper polarity on the crossconnect block. 
A lineman's test set, several clip leads and a 
VOM may be necessary to effectively 
troubleshoot the unit. 
 
Table 3 identifies some possible problems and 
solutions. 
 
If a spare unit is available, continue to 
troubleshoot by substituting the spare unit for the 
suspected unit. 
 
Assistance in troubleshooting is available from 
the factory.  When calling, you should have a 
VOM and a telephone test set available and be 
calling from the job site.  Call (540) 563-2000 for 
Technical Support or visit our website at 
http://www.valcom.com. 

 

Valcom equipment is not field repairable. Valcom 
maintains service facilities in Roanoke, VA.  
Should repairs be necessary, attach a tag to the 
unit clearly stating your company name, address, 
phone number, contact person and the nature of 
the problem.  Send the unit to: 

Valcom, Inc. 

Repair and Return Dept. 

5614 Hollins Road 

Roanoke, VA   24019-5056

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for V-1109RTVA










Reviews: