Valcom IP bold series, Installation & Operation Instructions

Page: 35 / 79

IP BOLD
- installation and operating instructions
35
Peer to Peer mode (P2P)
After performing of changes
please don’t forget click on „Save changes“.
title - name
– name by which is device presented in network (for example will
display as door entry name in programms UDV panel, UDVguard)
Name - unit name in SIP protocol (usually line number), it is recommended
to keep filled.
Port - SIP port is usually 5060 or 5061
Provisional code -
determine if during ringing will be sends SIP code „180
Ringing
“ or „183 Session progress“
Symetric RTP enable - by mark is ON. It means that door entry will not sends
by itself audio to RTP called party, but wait for called party to send