assembly
FIGURE A
1. Remove the carton contents carefully. Dispose of any
packaging materials thoughtfully.
Release the locking clamp by lifting it outward off the
rivet (1a). Grasping the front bar with one hand and the
handle with the other, push them carefully apart until you
hear the frame click into place.
2. Engage the primary locking mechanism by pressing
down (with your hand or foot) on the joint.
FIGURE B
3. Identify both front (3a - wheel locking rim on housing)
and rear (3b - brake levers on top of the wheel housing)
wheels before use.
4. Insert the rear wheels onto the frame at (4). Be sure
that the brake levers are facing outside, away from
the stroller frame.
5. Insert the front wheels onto the frame at (5). Push the
front wheel release button inwards whilst pushing the
wheel onto the frame until you hear it click into place.
WARNING: Be sure that all the wheels click securely
into place.
FIGURE C - HOOD
6. Attach the hood by firmly pressing the clamps on either
side onto the inside of the stroller frame (5).
7. Secure the top of the hood to the frame by wrapping the
velcro around the frame tube and securing.
YOUR STROLLER IS NOW READY FOR USE.
OPeNING/FOlDING yOUR sTROlleR
FIGURE D
1. Fold your hood back up against the handles.
2. Standing behind your stroller, lift the primary safety lock
with your foot or hand.
3. With your foot, press down on the secondary locking
device and simultaneously push the handles forward.
4. Continue pressing down on the handles till they meet the
wheels.
5. Lock the stroller into the closed position by using the
locking handle found on the side of the frame.
A
B
4
C
D
1a
2
3a
3b
5
6
7
2
3
4
5
5
