background image

UsING yOUR bRakes

FIGURE E

1. To lock, simply press down on the rear of each brake 

lever until the brake pin engages into the wheel cog.

2. To unlock, release the brake pin from the wheel cog by 

lifting the brake lever.

ALWAYS CHECK THAT THE BRAKE PIN HAS ENGAGED IN THE 

WHEEL COG BY TESTING THAT THE WHEEL CANNOT ROTATE.

RemOvING/INsTallING yOUR FRONT baR

FIGURE F

1. Press the side button (1) while simultaneously pulling at 

the front bar until it separates from the housing.

2. Repeat this procedure with the other side.

3. Reverse the process to re-insert the front bar.
ADJUSTING THE FOOTREST

4. Simultaneously press the two buttons located on each 

side inwards until the footrest is at the desired position.

aDjUsTING The seaT

FIGURE G

The new recline system offers an almost infinite amount 

 

of seat adjustments:

 1. RECLINE: While squeezing the centre release 

mechanism pull gently down to ease the seatiease the 

seat into the desired position.

2. INCLINE: Squeeze the center release mechanism and 

grasp the incline strap with your other hand.

3. Pull the incline strap (3) while gently pushing on the rear 

of the seat until the desired position has been reached. 

Always test that the seat is securely locked in place 

before use.

UsING yOUR haRNess

FIGURE H

Your VALCO pram is fitted with a 5 point safety harness 

system. Your child MUST always be harnessed while in the 

stroller.

TO SECURE YOUR CHILD IN THE HARNESS:

1.Insert Buckles (A) and (B) into either side of the Buckle 

Housing (C). Keep inserting until they click into place 

securely.

2.Carefully adjust the harness straps to snugly fit your 

child by adjusting the Sliders (D) located on allShoulder 

Straps, Waist Straps and Crotch Strap.The harness 

should be snugly fitted to the baby’s body, tight enough 

so that the baby cannot wriggle itself free of the straps 

but loose enough so as not to cause the baby any 

discomfort.

TO OPEN THE HARNESS:

1.Release the Buckle Prongs – Squeeze on the top and 

bottom prongs simultaneously and pull apart from the 

Buckle Housing.

This process may be difficult as your buckle system has 

been designed to meet very stringent safetystandards to 

ensure that a child cannot release the harness unaided. 

E

F

H

PRESS

PULL

3

A

B

G

1

1

4

C

1

Summary of Contents for ORION

Page 1: ...r procedures outlined here have changed since this document was written If you are unsure of any procedure shown here please contact us via the web at info valco com au to obtain the most up to date information before use Include the batch number which can be found on a sticker the stroller frame All pictures and diagrams herein are provided for illustration purposes only Actual product colour or ...

Page 2: ...the front wheel release button inwards whilst pushing the wheel onto the frame until you hear it click into place WARNING Be sure that all the wheels click securely into place FIGURE C HOOD 6 Attach the hood by firmly pressing the clamps on either side onto the inside of the stroller frame 5 7 Secure the top of the hood to the frame by wrapping the velcro around the frame tube and securing YOUR ST...

Page 3: ...ncline strap with your other hand 3 Pull the incline strap 3 while gently pushing on the rear of the seat until the desired position has been reached Always test that the seat is securely locked in place before use Using your harness FIGURE H Your VALCO pram is fitted with a 5 point safety harness system Your child MUST always be harnessed while in the stroller TO SECURE YOUR CHILD IN THE HARNESS ...

Page 4: ...ry additional children in the stroller It may be unsafe to use any accessories other than VALCO approved ones NEVER allow the stroller to be used as a toy NEVER allow your child to stand up in the stroller Although the chassis is strong it will be weakened when descending steps curbs with the back wheels only ALWAYS be aware of the risks provided by fire and other significant sources of heat such ...

Reviews: