7
EN
Using the appliance
6
EN
A
A
Using the appliance
5. Install the v-flap, converter and expansion pipe onto the cooker hood. Fix the expansion
pipe on the outlet with a cable tie. See Pic 3.
Note: the expansion pipe not included in the
product.
6. Put the hood hang on the wall in the fixed position, adjusting the cooker hood position,
fix the cooker hood with 2pcs ST4*30mm safety screws. Note: The two safety vents are
positioned on the back housing, with a diameter of 6mm. See Pic 4 & 6.
7. Install the outside chimney bracket onto the outside chimney with 2 pcs ST4*8mm screws,
make sure the inside chimney can be flexed freely. See Pic 5. And then put the chimney
to the hood, use 2 pcs ST4*8mm screws fix the outside chimney to the hood body and the
use 2pcs ST4*40mm fix it on the wall. Lay the expansion pipe to the outside at the same
time. See Pic 6.
8. Adjust the height of the inside chimney to the position of the inside chimney bracket and
fix it with 2pcs ST4*8mm screws. See Pic 7.
Pic 2
Pic 3
Pic 4
Pic 5
Pic 6
Pic 7
inside chimney bracket
st4*40mm screws
mounting screws
safety screws
expension pipe
converter
v-flap
Cable tie
inside chimney
outside chimney bracket
outside chimney
Summary of Contents for FIH 60 MK 302C
Page 2: ......
Page 38: ...72 73 Notes Notes Notities Notas Notes Notes Notities Notas...
