VALBERG CYCLONIC-S12 AUTO, Instructions For Use Manual

Page: 26 / 66

25 EN
Detaching the tools
• Make sure the unit is switched off.
• Press the release button on the extension tube/motorised floor brush/crevice tool/2-in-1
brush and then pull to detach the tool from the main unit.
Operation
To turn on the vacuum, press the ON/OFF button. The vacuum cleaner will turn on
in AUTO mode and the power display screen will appear. When in AUTO mode, the
dust-sensing function is enabled. The display animation will change from blue (no
dust) to purple when it detects dust.
Press the power button repeatedly to select TURBO, MEDIUM, ECO or AUTO power.
• To turn off the vacuum, press the ON/OFF button again.
• Empty the dust cup before its contents exceed the MAX mark (see Emptying the dust cup
in the Cleaning and maintenance section).
• Once you have finished using the unit, always turn it off. To clean the unit, follow the
instructions in the Cleaning and Maintenance section.
• Charge the vacuum cleaner after each use to ensure the unit is fully charged and ready
for the next use.
NOTE:
• When vacuuming heavily soiled surfaces, regularly turn the unit off and check
the mouth of the tool is clean to avoid scratching delicate surfaces.
• To avoid blocking the vacuum cleaner, remove large pieces of waste, such as
paper or plastic, from the area before vacuuming.
Installing the wall mount
NOTE:
• Securely install the wall mount on a wall that is strong enough to support
the weight of the unit.
• Install the wall mount in a dry area, away from extreme heat or cold, and
ideally close to a mains socket.
The wall mount (with the supplied wall plugs and screws) can be installed to easily store the
vacuum cleaner.
Product usage
B