VALBERG CYCLONIC-S12 AUTO, Instructions For Use Manual

Page: 31 / 66

30 EN
Problem Possible Cause Solution
The unit only
works for a
short period of
time after being
charged.
• The unit was not fully
charged.
• The built-in
rechargeable battery is
faulty or has reached
the end of its service
life.
• Fully charge the unit as indicated in
the Charging the vacuum cleaner
section.
• The built-in rechargeable battery
must be replaced by an authorised
technician. Do not attempt to replace
it yourself.
The motorised
floor brush is not
spinning.
• The bristle/roller
brush or a wheel axle
is blocked by debris
(hair, fur, fibres, etc.).
• Clean the brush or wheel as indicated
in the Cleaning and maintenance
section. Make sure the parts spin
smoothly once they are re-assembled.
The suction is not
strong, there is
no suction, or the
motor vibrates.
• The extension tube,
vacuum tool, dust cup
or filters are partially
blocked or full of dirt.
• Remove the blockage.
• Clean the filters.
• If necessary, replace the filter with
a new one.
The battery
indicators are
flashing quickly,
and the vacuum
cleaner is hot.
• The vacuum cleaner’s
battery or motor has
overheated and/or
there is a blockage.
• The AC adapter is not
compatible with the
vacuum cleaner.
• Turn off the unit and let it cool down
completely. Clear the blockage, if
applicable.
• When charging and using the
unit, make sure that the ambient
temperature is between 5°C and
40°C.
• Only use the AC adapter supplied with
the unit.
Error Messages
In the event of a malfunction, the vacuum cleaner may display one of the following error
messages on the display screen. Refer to the Cleaning and maintenance section for details
on how to remove blockages.
Icon Meaning
The air channel is blocked in the floor brush or the extension tube.
Remove any blockages and clean the parts.
Cleaning and maintenance
C