manualshive.com logo in svg

Val Controls IHP24-A, Manual

Share
Download
Val Controls IHP24-A Manual Download Page 55

 
 

 

DHP-UM-013 

Val Controls A/S 

•

 Limfjordsvej 3 

•

 DK-6715 Esbjerg N 

•

 Tel. +45 7547 0600 

•

 Fax +45 7547 0611 

 

[email protected] 

•

 www.valcontrols.com 

 

 

Revision: 4 

 

 

55/58 

exists. 

FSTATE_VAL_D 

[Options] 

 

Description: The preset discrete SP_D value to use 
when fault occurs. This value will be used if the I/O 
option Fault State to value is selected. 

SHED_OPT 

[Options] 

 

Description: Defines action to be taken on remote 
control device timeout. 

ALERT_KEY 

[Alarms] 

 

Description: The identification number of the plant 
unit. This information may be used in the host for 
sorting alarms etc. 

BLOCK_ERR 

[Diagnostic] 

 

Description: This parameter reflects the error status 
associated with the hardware or software components 
associated with a block. It is a bit string, so that 
multiple errors may be shown. 

STRATEGY 

[Others] 

 

Description: The strategy field can be used to 
identify grouping of blocks. This data is not checked 
or processed by the block. 

PV_STATE 

[Others] 

 

Description: Index to the text describing the states of 
a discrete PV. 

BKCAL_OUT_D 

[Others] 

 

Description: The output value and status provided to 
an upstream discrete block. This information is used 
to provide bump less transfer to closed loop control. 

UPDATE_EVT 

[Others] 

 

Description: This alert is generated by any change to 
the static data. 

BLOCK_ALM 

[Others] 

 

Description: The block alarm is used for all 
configuration, hardware, and connection failure or 
system problems in the block. The cause of the alert 
is entered in the sub-code field. The first alert to 
become active will set the Active status in the Status 
attribute. As soon as the Unreported status is cleared 
by the alert reporting task, another block alert may be 
reported without clearing the Active status, if the 
sub-code has changed. 

6.7

 

Appendix - PID Function Block (PID)  

Follows the standard for Fieldbus PID functionality. 

 

Summary of Contents for IHP24-A



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands