manualshive.com logo in svg

Val Controls IHP24-A, Manual

Share
Download
Val Controls IHP24-A Manual Download Page 16

 
 

 

DHP-UM-013 

Val Controls A/S 

•

 Limfjordsvej 3 

•

 DK-6715 Esbjerg N 

•

 Tel. +45 7547 0600 

•

 Fax +45 7547 0611 

 

[email protected] 

•

 www.valcontrols.com 

 

 

Revision: 4 

 

 

16/58 

5.4

 

Changing Node ID from NI-FBUS 

If you need to change the Fieldbus Node ID address then you should do it now. 

•

 

Click on ‘ValControls’ in the tree window. 

•

 

In the menu select ‘ValControls”. 

•

 

Choose ‘Set Address’. 

•

 

Press ‘Yes’ if you get a warning 

•

 

Now you can set the Address in between 17 – 36 and 223 - 247 

5.5

 

Modifying Device Tag name 

If the default tag names “ValControls” conflicts with the other tag names in the network, they can 
be modified with the NI-FBUS tool. 

5.6

 

Modifying Block Tags names 

If the default tag names “AI” .. “AO” conflicts with the other tag names in the network, they can be 
modified with the NI-FBUS tool. 

5.7

 

Factory Reset of the device. 

Do not make a factory reset of the device, since it will reset all parameters in the MTB transducer 
block and all TAG names and Node ID address.  

 

Summary of Contents for IHP24-A



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands