Chapter 5__________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 67
where
Message_interval =
Given in multiples of 15 s (= measuring
interval). Therefore, intervals 15, 30, 45... are
valid. Other intervals are converted to integer
multiples of 15 s. The maximum sending
interval is 255 s (4 min. 15 s). Negative or
zero interval ignores the automatic sending.
This is used when messages are polled. For
details, refer to section Automatic Message
Sending on page 62.
For example, the following command selects message number 0 to be
sent once in a minute:
AMES 0 60
The following command selects message number 0 and cancels the
automatic sending:
AMES 0 0
The AMES command without parameters displays the current
selection.
Weather Related Commands
The following commands are used to display/set the weather analysis
parameters and results.
- WPAR
Weather parameter message
- WSET
PRW reference values
- CLRS
Clear precipitation sums
