User's Guide _______________________________________________________________________
40____________________________________________________________________ M210543EN-B
Installation Procedure
This section describes only one installation alternative, in other words,
using a sensor support arm and Vaisala weather station as the host
computer.
Unpacking Instructions
The contents of the delivery are specified in the packing list included
with the delivery documents. The PWD22 equipment is usually
delivered in one case.
NOTE
The case should be handled gently. Do not drop either end of the case
more than five centimeters.
Unpacking Procedure
1.
Read the packing list supplied within the delivery documents.
Then compare the packing list against the purchase order to
make sure that the shipment is complete.
2.
Open the cover. In case of any discrepancies or damage, contact
the supplier immediately.
3.
Place the packing materials and cover back in the delivery case
and store them for possible reshipment.
NOTE
Do not touch or hit the Vaisala RAINCAP
®
Rain Sensor plate. It is
fragile.
Do not bend the signal cable with less than 2 cm (1 inch) radius, and
do not leave it unsupported to lean to the ground or table.
Storage
Store PWD22 in its package in dry conditions, not in the open air. The
storage conditions are as follows:
- Temperature -40 °C to 70 °C
- Relative humidity up to 95 %
