User's Guide ______________________________________________________________________
20 __________________________________________________________________ M210667EN-C
Recycling
Recycle all applicable material.
To separate waste for the LT31 system, do the following:
1.
Remove the optional LM21 and LT31OBS, if installed. They have
to be disposed of separately as electronics waste material.
2.
Remove the measurement head covers and measurement units
LTM112 and LTM212.
3.
Cut/remove all the cables from the structure. They have to be
disposed of separately as electronics waste material.
4.
Remove the blowers and the junction boxes. They have to be
disposed of separately as electronics waste material.
5.
Remove the complete optics units LTO112 and LTO212 from the
measurement units. They have to be disposed of separately as
electronics waste material.
6.
Remove the complete mounting plate including all electrical
components from the interface units LTI111 and LTI211. They
have to be disposed of separately as electronics waste material.
7.
In case TERMBOXes are in use, remove the complete mounting
plate including all electrical components from the boxes. They have
to be disposed of separately as electronics waste material.
After this strip down work is carried out, the LT31 system is prepared for
material recycling:
- The upper and lower interface unit covers and the air ducts of the
measurement units are plastic parts and fully recyclable (>ASA<).
- The interface unit enclosures LTI111 and LTI211 (to be removed) are
stainless steel parts and fully recyclable.
- The remaining mechanical structure is exclusively manufactured from
aluminum and fully recyclable.
Dispose of batteries and the unit according to statutory regulations.
Do not dispose of with regular household refuse.