User's Guide ______________________________________________________________________
190 _________________________________________________________________ M210667EN-C
The following is an example of modifying sequence A:
Sequence (A) Duration In Seconds: [0]
Typing
300<CR>
will change the duration to 300 s.
Sequence (A) VIS In m: [5000.0]
Typing
8000<CR>
will change the visibility data to 8000 m.
Sequence (A) AL: [00000000000000000000]
Typing
E<CR>
will change the first character of the overall status to E.
Further characters remain unchanged.
Sequence (A) BL In cd*m^-2: [20000]
Typing
1000<CR>
will change background luminance data to 1000 cd/m
2
.
Sequence (A) AL: [0]
Typing
<CR>
will keep the background luminance status data unchanged.
The summary of sequence data is displayed in Figure 110 below.
0401-111
Figure 110 Summary of Sequence Data
Simulation can either be switched on or off by pressing (K) SWITCH
ON or (L) SWITCH OFF or by giving SIMULATE SEQUENCE or
SIMULATE OFF on the command line on the advanced level.
Once the simulation sequences are enabled, the data of each sequence is
valid for a given time. If the time of a valid sequence runs out, the next
valid sequence (duration greater than zero) is chosen. If the last valid
sequence runs out, the first valid sequence is chosen. Refer to the
example given in the paragraph on the next page.