USER'S GUIDE____________________________________________________________________
18 _______________________________________________________________ M210619EN-C
The transmitter module can be unfastened for calibration by releasing
the two Allen screws on the left side.
0507-034
Figure 3
Mounting with Mounting Plates
The following letters and numbers refer to Figure 3 above:
A = Mounting with larger mounting plate
B = Mounting with smaller mounting plate
1 = Two Allen screws for fastening or removing the transmitter
module (Allen key provided)
2 = Four screw holes (Ø 4.5 mm) for wall mounting (screws not
provided)
3 = Two screw holes (Ø 6.0 mm) on the base of the plate for wall
mounting (screws not provided)
