USER'S GUIDE____________________________________________________________________
24 __________________________________________________________________ M211371EN-B
Installation Without Weather Shield
1.
Remove the yellow transport protection plug
when you are ready to install the transmitter.
2.
Install the transmitter to the mechanical
coupling and tighten by hand.
3.
Use a wrench to tighten the connection. Turn
from the adapter, not from the transmitter
body!
Use sufficient force to achieve a tight
installation. The system must be leak-free for
accurate measurement.
4.
Connect the cable to port II on the transmitter.
Use a cable with a suitable connector for your
installation (straight or angled).
Let some of the cable hang from the back of the
transmitter, so that condensation cannot run
along the cable to the transmitter.