60
Installation and maintenance instructions 0020257297_06
4.10.3 Setting up a protective wall
Condition
: The installation site is not protected against the wind
▶
Set up a protective wall upstream of the air inlet to pro-
tect against the wind.
4.10.4 Installing the condensate discharge pipe
1.
Connect the condensate discharge pipe to a downpipe
over a short distance.
2.
Depending on the local condition, install electrical trace
heating in order to keep the condensate discharge pipe
frost-free.
4.11
Removing the casing sections
4.11.1 Removing the top casing
A
B
2×1
▶
Remove the top casing as shown in the figure.
4.11.2 Removing the right-hand side casing
A
B
2×1
▶
Remove the right-hand side casing as shown in the fig-
ure.
4.11.3 Removing the front casing
A
B
2×1
▶
Remove the front casing as shown in the illustration.
4.11.4 Removing the air outlet grille
A
C
5×1
B
3×1
▶
Remove the air outlet grille as shown in the figure.
4.11.5 Removing the left-hand side casing
B
A
2×1
▶
Remove the left-hand side casing as shown in the figure.
Summary of Contents for VWL 105/5 AS S2
Page 203: ......
