Installation instructions 0020140122_04
5
a
a
It will be necessary to install the unit in a location where it
will not be exposed to moisture or water splashes. Observe
the electrical protection (IP) contained in the technical data.
Any other use than the use described in the instructions at
hand or any use extending the described use is not
intended.
Any direct commercial or industrial use is also deemed to
be improper.
2.3
Rules and regulations
2.3.1 List of relevant standards for Great Britain
and Ireland
>
Observe the national regulations, standards, directives,
ordinances and laws.
You can find a list of relevant standards at:
www.vaillant.co.uk/standards
2.3.2 Benchmark
Vaillant is a licensed member of the Benchmark Scheme.
Benchmark places responsibilities on both manufacturers
and installers. The purpose is to ensure that customers are
provided with the correct equipment for their needs, that it
is installed, commissioned and serviced in accordance with
the manufacturer’s instructions by a competent person
approved at the time by the Health and Safety Executive
and that it meets the requirements of the appropriate Build-
ing Regulations. The Benchmark Checklist can be used to
demonstrate compliance with Building Regulations and
should be provided to the customer for future reference.
Installers are required to carry out installation, commission-
ing and servicing work in accordance with the Benchmark
Code of Practice which is available from the Heating and
Hotwater Industry Council who manage and promote the
Scheme.
Benchmark is managed and promoted by the Heating and
Hotwater Industry Council.
For more information visit www.centralheating.co.uk
2.4
CE label
The CE marking shows that the products comply
with the basic requirements of the applicable
directives as stated on the declaration of con-
formity.
The declaration of conformity can be viewed at the manu-
facturer’s site.
