Vaillant miniVED VED H 3/3, Operating Instructions Manual

Page: 18 / 168

18
Installation and maintenance instructions 0020323584_00
4.4 Requirements for the
installation site
▶
Select the installation site so that the
pipes can be easily routed (water sup-
ply and drain).
▶
Do not install the product close to stair-
ways or emergency exits.
▶
Install the product in a frost-free room.
▶
Install the product as close as possible
to the draw-off point.
Note
It is not necessary to install an
expansion relief valve.
▶
Only install the product with the water
connections upwards below the sink.
▶
Ensure that the fixing screws for the
front casing can also be accessed after
the installation.
4.5 Wall-mounting the product
1. Check the load-bearing capacity of
the wall.
2. Note the total weight of the product.
3. Only use fixing material that is permit-
ted for the wall.
4. If required, ensure that mounting ap-
paratus on-site has sufficient load-
bearing capacity.
5. Wall-mount the product as described.
4.6 Removing the frame from the
product
X2
1 2
3
1. Loosen the two fixing screws by two
rotations.
2. Use a flat-blade screwdriver to lever
the frame's seal.
3. Carefully tilt the product with the heat-
ing element towards yourself until
you can remove the product from the
frame.
4.7 Installing the frame
1. Guide the power supply cable through
the grommet.