Vaillant miniVED VED H 3/3, Operating Instructions Manual

Page: 7 / 168

0020323584_00 Operating instructions
7
Information on the
data plate Meaning
VDE/GS mark
VDE/EMC mark
Do not dispose of
the product in the
household waste.
Read all of the in-
structions.
Barcode with serial
number,
The 7th to 16th digits
of the serial number
form the article num-
ber
3.4 CE marking
The CE marking shows that the products
comply with the basic requirements of the
applicable directives as stated on the de-
claration of conformity.
The declaration of conformity can be
viewed at the manufacturer's site.
4 Operation
4.1 Switching on the product
Danger!
Risk of scalding caused by
hot water
During operation, the domestic
hot water temperature can
reach 50 °C and above. As of
a domestic hot water temper-
ature of 43 °C, there is a risk of
scalding.
▶
We recommend operating
the product with a filter at the
cold water connection and
a flow regulator at the water
tap for the draw-off point.
▶
Only start up the product once the cas-
ing has been completely closed.
▶
Open the valve and/or activate the
sensor for the valve with infrared detec-
tion. The domestic hot water heating
element starts automatically. The tem-
perature can be adjusted at the valve.
▶
You can find the required minimum flow
rate for starting the heating element
in the technical data in the installation
instructions.
4.2 Increasing the water
temperature
Condition : Even though the tap is set to the max-
imum temperature, the water temperature is too low
for you.
▶
Decrease the flow rate at the tap.
4.3 Lowering the water
temperature
Condition : Even though the tap fitting has been set
to the minimum temperature, the water is too hot.
▶
Increase the flow rate quantity at the
tap fitting or increase the cold water
volume.
5 Eliminating faults
Danger!
Risk of death caused by im-
proper repair work
▶
If the power supply cable is
damaged, never replace this
yourself.
▶
Contact the manufacturer,
customer service or a simil-
arly qualified person.