background image

Decommissioning 7

0020220342_01 ecoTEC plus Operating instructions

11

6.4

Checking the condensate drain pipework
and tundish

The condensate drain pipework and tundish must always be
penetrable.

Regularly check the condensate drain pipework and tun-
dish for faults and, particularly, for blockages.

You must not be able to see or feel any obstructions in the
condensate drain pipework and tundish.

If you notice a fault, have it rectified by a competent per-
son.

7

Decommissioning

7.1

Temporarily decommissioning the product

Caution.
Risk of material damage due to frost.

The frost protection and monitoring devices

are only active while the unit is connected

to the power mains and switched on via the

on/off button, and when the gas isolator cock

is open.

Temporarily decommission the product

only if no frost is expected.

Temporarily decommission the product only if no frost is
expected.

Press the on/off button.

The display goes out.

When decommissioning the product for a prolonged
period (e.g. holiday), close the gas isolator cock and also,
for combination products, the cold water stop valve.

7.2

Permanently decommissioning the product

Have a competent person permanently decommission
the product.

8

Recycling and disposal

The competent person who installed your product is re-
sponsible for the disposal of the packaging.

If the product is identified with this symbol:

In this case, do not dispose of the product with the
household waste.

Instead, hand in the product to a collection centre for old
electrical or electronic appliances.

If the product contains batteries that are marked with

this symbol, these batteries may contain substances that are
hazardous to human health and the environment.

In this case, dispose of the batteries at a collection point
for batteries.

9

Guarantee and customer service

9.1

Guarantee

Two year guarantee for ecoTEC plus appliances

Vaillant provides this appliance with a parts and labour
guarantee against defects that may occur within twenty-
four months of the installation date. For the 2nd year of the
guarantee to be valid an annual service must be carried out
by a competent person approved at the time by the Health
and Safety Executive one year after installation. The cost of
this annual service is not included in the guarantee.

Registering with us

Registration is simple. Just complete the Guarantee Regis-
tration Card and return to Vaillant within 30 days of installa-
tion. Your details will then be automatically registered within
the Vaillant scheme.

Immediate help

If your Vaillant boiler develops a fault your first action should
be to contact your installer, as his professional assessment
is needed under the terms of our Guarantee. If you are un-
able to contact your installer, phone Vaillant Service Solu-
tions: 0870 6060 777

9.2

Customer service

To ensure regular servicing, it is strongly recommended
that arrangements are made for a Maintenance Agreement.
Please contact Vaillant Service Solutions for further details.

Vaillant Service Solutions: 0330

100

3461

Summary of Contents for ecoTEC plus VU

















Reviews: