background image

Installation manual auroTHERM 0020077994_00

38

Recycling and disposal

The development of all Vaillant products takes into ac-
count the future with regard to use of materials that 
can be easily recycled with the least detrimental affects 
upon our environment. The packaging makes maximum 
use of recycled materials and the appliance itself  con-
sists mainly of metals that are readily separated into re-
cyclable raw materials. After many years of reliable op-
eration our appliance can be disposed via recognised re-
cycling and reclamation facilities in a way that will cause 
least harm to our environment.

9   Vaillant Customer Service 

and warranty

9.1 Vaillant 

warranty

Vaillant provides a full parts and labour warranty for 
this appliance. 
The appliance and all associated pipe work and controls 
must be installed by  suitably competent persons in ac-
cordance with all current and relevant safety, building 
control and planning regulations and in full compliance 
with the manufacturer’s instructions.
All unvented domestic hot water cylinders must be in-
stalled by a competent person to the prevailing building 
regulations at the time of installation (G3).
Terms and conditions apply to the warranty, details of 
which can be found on the warranty registration card in-
cluded with this appliance.
Failure to install and commission this appliance in com-
pliance with the manufacturer’s instructions may invali-
date the warranty (this does not affect the customer’s 
statutory rights).

9.2 Vaillant 

service

To ensure regular servicing, it is strongly recommended 
that arrangements are made for a Maintenance Agree-
ment. 
Please contact Vaillant Service Solutions
(0870 6060 777) for further details.

8 Disposal 
9 Vaillant Customer Service and warranty

Summary of Contents for auroTHERM VTK 570/2













































Reviews: