21
Installation manual auroTHERM 0020077994_00
5.2.2 Bracket Type S (for high profile pantiles)
a
Caution!
Before installation on the roof batten, check
the load capacity of the roof batten!
If necessary, replace the roof batten.
4
2
1
3
Fig. 5.6 Fixing the bracket type S
1. Uncover the rafters or the roof batten where needed.
For distances please see Tab. 5.1 and 5.2.
2. Position the bracket. Take note of the correct posi-
tions of the upper, central and lower brackets
(see Fig. 5.3).
5.2.3 Bracket Type S (Low profile for slate/ flat
tiles)
a
Caution!
Only acceptable if roof and battens have been
inspected by a competent roofing contractor /
designer.
Before installation on the roof batten, check
the load capacity of the roof batten!
If necessary, replace the roof batten or provide
additional timber bearers.
Also ensure battens are fixed securely (screw
to rafter each side of brackets).
4
2
1
3
Fig. 5.7 Fixing the bracket type S flat
1. Uncover the rafters or the roof batten where needed.
For distances please see Tab. 5.1 and 5.2.
2. Position the bracket. Take note of the correct posi-
tions of the upper, central and lower brackets
(see Fig. 5.3).
3. Screw the bracket to the rafters/roof batten with the
3 supplied bolts.
4. Slide the pantiles back to the original position.
3. Screw the bracket to the rafters/roof batten with the
3 supplied bolts.
4. Slide the pantiles back to the original position.
On-roof mounting 5
GB
Summary of Contents for auroTHERM VTK 570/2
Page 43: ......
Page 44: ...0020077994_00 GB 022009 Modifications reserved...
