Vaillant atmocraft, Installation And Maintenance Instructions Manual

Page: 5 / 44

3
Installation and maintenance manual atmoCRAFT
GB
Notes on the documentation 1
Description of the appliance 2
2 Description of the appliance
2.1 Identification plate
The identification plate is mounted on the back of the
electronic box.
1
4
3
2
Fig. 2.1 Identification plate
The following information can be taken from the
identification plate:
1 Manufacturing number
2 Type name
3 Designation of the type approval
4 Technical data
1 Notes on the documentation
The following information is intended to help you
throughout the entire documentation.
Further documents apply in combination with this
installation and maintenance manual.
We accept no liability for a damage caused by failure
to observe these instructions.
Documents which are also valid and auxiliary service
equipment
For the owner of the system:
Operating manual no. 838364
The manuals for any accessories and controllers used
also apply.
Auxiliary service equipment:
The following test and measuring equipment are
required for inspection and maintenance:
– CO
2
-measuring instrument
- Pressure gauge
1.1 Storage of the documents
The short-form instructions are glued onto the top
section of the control field cover. You can enter the
individual capacity data of the boiler and your address
next to this.
Please pass on this operating and installation manual
and all other valid documents to the owner of the
installation in order for him or her to store it so that it is
available whenever it is required.
1.2 Symbols used
Please observe the safety instructions in this installation
manual for the installation of the appliance.
The symbols used in the manual are explained below:
Danger!
Danger of death by electrocution!
Danger!
Immediate risk of serious injury or death
Caution!
Potentially dangerous situation for the product
and environment.
Note!
Useful information and instructions
• Symbol for a necessary task