23
The default settings of the
“Ajust Size”
menu is the next one:
Horizontal 5 & Vertical 7
Once you have adjusted image, you have to calíbrate the touch screen again, push on
“Settings”
, then push on
“Touch Screen”
, and repeat the steps for calibration process mentioned before.
NOTE:
Remember to
do again a calibration of the touch screen
after adjusting the image on the screen.
Even if you do this changes and you can’t adjust the image as much as you want, you can use the
multimedia
interface
image setting menu.
Now push the
◀
button of the
multimedia interface
remote control
for
5 seconds
to enter to the
advanced
settings menu
, this image will be shown:
Use
▲
or
▼
buttons
of the remote control to select
IMAGE
in the menu, and push OK to enter. Now use
▲
or
▼
buttons
of the remote control to select between the
H-‐POSITION
(Horizontal position) and
V-‐POSITION
(Vertical
position), once you have entered to one of the options, adjust it by using the
▲
or
▼
buttons
of the remote control,
push
OK
to confirm.
Push
MENU
button of the remote control until the advanced menu settings of the multimedia interface disappears
from the screen.
Remember to do again a touch calibration after adjusting the screen’s image.
Now you can insert the
maps SD Card
to the GSP Box.
