19
2.7.
Voice module installation and connections:
Ø
Voice module:
fig.1
fig.2
fig.3
Voice Module with a
LED Light that indicates that is working
(fig. 1),
Quadlock cable connection
port (fig.2), Jack
connection port for the
Audio cable connection
and volume regulator (fig.3)
NOTE:
Voice module for the audio signal to the
vehicle’s front speakers
Ø
Audio connection cable from the voice module:
Insert to the voice module the
black jack 3.5
type
connector, connect the
white and the red
RCA connectors to the
RCA AUDIO L OUT
and
AUDIO R OUT
connectors from the “
GPS Box POWER wiring harness”
(red to red, white to
white).
Ø
Voice module Quadlock Plug and Play harness:
Connect the female Quadlock connector of the
Voice module Quadlock Plug and Play harness,
to the male
Quadlock connector of the vehicle (once you have removed vehicle’s radio), connect the
Voice module Quadlock
Plug and Play harness
male connector to the
vehicle’s Power
IN connection.
Connect the 12 pin White connector
to the Voice module Quadlock cable connection port and connect the yellow
loose cable to
a +12V ACC ignition source.
NOTE: The POWER connection always must be the last step in installation.
