17
7.5.3 Propulsion data
Figure 12 – Propulsion Data Screen
The upper part of this screen is showing “
Average Propulsion Data
” over the last 1, 4 and 24 hours.
When the propeller shaft is rotating the PEM2 is continuously recalculating these average values.
In case the propeller shaft is not rotating the average values stay as they are.
“
Total Energy
” consumed by the propeller and the “
Total Number of Revolutions
” made by the shaft are
available at the lower part of the screen.
The “
Total Energy
” value jumps from kW to MW to GW (min. 0,000 kW and max. 9999 GW).
The “
Total Revolutions
” value jumps from E3 to E6 to E9 (respectively 1000, 1x10
6
and 1x10
9
revolutions)
These total values can be set to zero anytime by pushing the Reset buttons.
After resetting “
Total Energy
” and “
Total Revolutions
” the previous displayed values are
lost.
7.5.4 Info Screen
Figure 13 – Info Screen
This screen is displaying all essential data in case you to have to contact VAF Instruments regarding
your T-Sense
®
torque measuring system.
Summary of Contents for PEM2
