VAF instruments PEM2, Technical Manual

Page: 21 / 33

21
8. MAINTENANCE
No special maintenance is needed for the PEM2 touch screen.
The touch screen can be cleaned with a dry and clean cloth.
Do not use any cleaning product or chemical on the screen.
9. REPAIR
Nothing on the PEM2 touch screen can be repaired on site.
10. TAKE OUT OF SERVICE
Switch off the 24 Volts and/or 115/230 Volts power supply.
11. REMOVAL AND STORAGE OF EQUIPMENT
Switch off the 24 Volts and/or 115/230 Volts power supply.
Make sure that all wires that are connected to the PEM2 are labelled correctly so that re-installation of
the PEM2 can be done without any errors. Disconnect all the input and output wires.
Store the PEM2 in a box in a cool and dry place, so that the PEM2 cannot be damaged.
12. MALFUNCTION AND SEND FOR REPAIR
If the PEM2 stops working completely contact VAF Instruments for instructions.
In the event the PEM2 has to be sent back for repair, you can send it directly to:
VAF Instruments B.V.
Vierlinghstraat 24
NL-3316 EL Dordrecht
The Netherlands
13. ENVIRONMENT
The PEM2 touch screen has no negative influence on the environment during normal operation.
14. DISPOSAL
The PEM2 touch screen is made out of metal and electronics. It should be disposed according to local
laws of the country.