7
6. INSTALLATION AND FIRST USE
The PEM2 touch screen will be delivered with the software and correct data settings installed. First
connect the Modbus input and optional Modbus output cables to the touch screen.
The 24 VDC wires for power supply should be connected at last.
Note: There is no ON/OFF switch on the PEM2 touch screen. When the power supply is switched on
these screens will turn on.
Check if the inputs show any errors. If that is the case the connection(s) or connected equipment
should be checked and corrected.
6.1 TO RECORD NAMEPLATE DATA
This information is required when contacting the supplier for any reason.
Date of delivery:
Xx xxxxxxx xxxx
Serial number:
xxxxxxxxx
Hull number:
xxx
Type:
PEM2 touch screen
Above information can be found at the PEM2 info screen.
Summary of Contents for PEM2
