Vaderstad RAPID RDA S Series, Instructions Manual

Page: 15 / 122

RDA 500-800 S
Ver.2 01.11.2002 15
2.7 Removal of the transport plates, centre section
Figure 2.7
Lower the drill onto the ground so it is resting on the discs.
Undo the swivel rods from the transport plates (A).
While connecting the swivel rod to the seed box arm (B), the related wheel on the drill should be
slightly raised. For this purpose, two people should help each other with the installation. Discard
of the transport plates and the elastic straps.
2.8 Fitting a fan
Figure 2.8
Fit the fan as shown. The front part of the bracket should rest against the weld bead (A).
A
B
A
B