CRX 425-625
01.05.2015 1
29
2.11.1
Mechanical depth stopper.
Figure 2.20
The implement is also equipped with a mechanical depth stopper. By fitting spacers to the piston
rod on one of the hydraulic cylinders, you limit stroke length and thereby maximum working
depth. The working depth can now be regulated during operation to the extent permitted by the
new stroke length. Alternatively, a fixed working depth can be set by pulling in the piston rods as
far as the spacers will allow.
1 Operate the implement and set the desired working depth using the hydraulics.
2 Fit the number of spacers that can be accommodated between the ram and piston rod head on
the hydraulic ram equipped with spacer holders.
!
The more spacers that are installed, the shallower the working depth.
Store unused spacers in the hydraulic ram's spacer holder.
