WallVIEW HD-USB SR Camera System
WallVIEW HD-USB SR PTZ Camera System Document Number 342-0465 Rev. A 6 Page 6 of 28
Connectors and Functions (continued)
6) Composite Video (CVBS) Output:
The CVBS output feeds out SD video signals and is configurable with
the dip switches to choose between 480i/NTSC or 576i/PAL in 4:3 formats. Squeeze and letterbox modes
are also available (see dip switches).
7) EZ POWER VIDEO Port:
Use the RJ-45 EZ POWER VIDEO port with the Power Extension Module. The
Power Extension Module sends DC power over pins 1 & 2 to power the HD-USB camera for up to 150’
(45.72m). In the Case of the WallVIEW HD-USB SR system, the limitation is the USB 2.0 Extension Cable,
which extends USB 2.0 only 65’ (20m).
8) 5 VDC Output:
The 5 VDC output is on an EIAJ-03 connector was added to supply power to the active
Extreme USB Extender transmitter side. The receiver side is powered by the computer’s USB port or
powered USB Hub.
9) USB 2.0 Connector:
The USB 2.0 is on a type-B Female and attaches to a PC running a soft-client video
conferencing system or video capture software that uses UVC (USB Video Class) standard drivers. No other
drivers are required to plug the HD-USB into a computer and have it work. The UVC drivers will auto
negotiate the top resolution that the PC and HD-USB Camera can accomplish together and auto implement
it, and bob’s your uncle.
10) Settings Rotary Encoder:
The Settings encoder allows the user to easily access automatically negotiated
USB or H.264 Preset and User configurations without having to plug in a computer to configure it. While a
computer is recommended for set-up, this rotary allows for a quick set-up.
11) Ethernet 10/100 Port (H.264 Streaming Active with Software Release 2.0):
The network port has green
and yellow LEDs that indicate ready and usage states. The port allows for access to the internal web pages
for camera set-up and control. The network port will stream (unicast) H.264/MPEG4/AVC video (from CIF up
to and including 1080p/30) starting with Release 2.0 of the Software.
12) RS-232 Port:
The RS-232 Port allows external control systems to engage a rudimentary API. Basic
functions include pan, tilt zoom, on/off etc. The functions on the Vaddio IR Remote Commander are mirrored
in the API. Most control is expected to come from the internal web page via Ethernet, Telnet or over USB
2.0.
13) Permanent USB Resource Slot Card:
The lower row of connectors and the brains of the HD-USB Camera
are located on this permanent slot card. The card is not removable and is not compatible with any other
Vaddio camera. Please do not try to remove this card at any time.
ClearVIEW HD-USB PTZ Conferencing Camera
Diagram: Front View with Feature Call-outs:
1) Zoom Lens and Image Sensor:
The 19X optical zoom lens is
built around a 1/3-Type, high-speed, progressive scan CMOS
image sensor with a total of 1.3 Megapixels for precise HD video
image acquisition.
2) Blue Power Light:
A Vaddio blue power light is illuminated
when the camera is turned on.
3) IR Sensors:
IR sensors are built into the front of the HD-USB to receive IR signals from the IR remote
control supplied with the camera.
4) Red Tally Light:
The red tally light is not used with the HD-USB
Camera
➍
➊
➌
➋
