©
2007 Vaddio - All Rights Reserved. Pan/Tilt PRO - Document 341-590 Rev A.
P
P
A
A
N
N
/
/
T
T
I
I
L
L
T
T
P
P
R
R
O
O
Pan/Tilt Head for the Add-A-Cam™ PRO EZCamera™
Cable System for Professional Camcorders
Part Numbers: 999-6520-000 (North America), 999-6520-000 (International)
Overview:
The Pan/Tilt PRO pan/tilt head for the Vaddio™
Add-A-Cam PRO camera system seamless
integrates with all ProductionVIEW series of
camera controllers and switchers
(ProductionVIEW, ProductionVIEW FX and
ProductionVIEW Super Joystick). The Pan/Tilt
PRO is a broadcast quality pan/tilt head with
over one million steps of resolution, 354° of total
pan and 180° of total tilt, ± 3 arc minutes of
repeatability and can accommodate any of the
Canon® SD and HD professional camcorders
with the provided universal camcorder mounting
bracket. The Pan/Tilt PRO is the professional
solution for high quality video camcorders with
the Add-A-Cam PRO platform.
Intended Use:
Before operating the product, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other
than the one provided or outdoor operation has not been tested and could damage the system and/or create
a potentially unsafe operating condition.
Save These Instructions:
The information contained in this manual will help you install and operate your system. If these instructions
are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent
product drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded
from
www.vaddio.com
free of charge.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the risk
of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
Important Installation Note:
The Pan/Tilt PRO head is intended to be used with the Vaddio Add-A-Cam PRO system and controlled by
the ProductionVIEW series controllers. The range for panning and tilting the camera must not be impeded
by any obstruction within the range of the pan/tilt head and camera. Installation is not recommended in
areas where there is a potential for the camera or pan/tilt head to come into contact with other objects.
Damage to the system can be the result of a poorly positioned system.
Camera and Electronic Products for Integrators
Use only the power supply provided with the Add-A-Cam Pro System.
Use of any unauthorized power supply will void any and all warranties.
Figure 1:
Vaddio Pan/Tilt PRO pan/tilt head shown with universal
camcorder mounting bracket.
