Hot Shot Preset Camera Controller
Hot Shot Preset Camera Controller - Installation and User Guide - Document Number 342-0124 Rev D Page 11 of 16
General Specifications:
Hot-Shot Preset Camera Controller
Part Numbers
999-1036-000 - North America
999-1036-001 - International (with UK and Euro AC Cord Set)
Connectors & Controls
Rear Panel
5.5mm OD and a 2.5mm ID Coaxial Power Connector
36 Trigger Inputs and six (6) GND Terminals on Phoenix-type
connectors
Two (2) RS-232 Ports Male & Female for flexibility in configuration,
cascading and control through from a control system for codec control
with a touch panel
10-Position Dip Switch for system assignment and choice of
functionality
Controls - Front Panel
Front Panel: Power ON / Preset Enable, (Turn OFF to disable presets)
Compatible
Codecs/Controllers/Cameras
Polycom 8000 and 9000 series codecs
LifeSize Room System codecs with RS-232 port
TANDBERG C-Series - C40, C60 and C90
TANDBERG MXP Series (3000 and 6000)
Any control system that can receive an ASCII control string ending in a
carriage return & line feed and then format it to the functionality
required by the application and system design.
Vaddio PTZ Cameras:
ClearVIEW HD-20 PTZ Camera and all WallVIEW versions based
on the HD-20
ClearVIEW HD-19 PTZ Camera and all WallVIEW versions based
on the HD-19
ClearVIEW HD-18 PTZ Camera and all WallVIEW versions based
on the HD-18
ClearVIEW HD-USB PTZ Camera and all WallVIEW versions
based on the HD-USB
Power Supply
12 VDC, 1.0 Amp PowerRite (60/50Hz 110-240V) Switching Power Supply
and AC Cord Set Included
Dimensions (H x W x D)
1.72” (43.7mm) H x 18.93” (480.8mm) W x 6.0” (152.4mm) D,
1-RU Rack Height
Weight
2.90 lbs. (1.31541796 kg)
Compatible Vaddio Triggers
MicVIEW, AutoVIEW IR Sensor, StepVIEW Mat, TouchVIEW Buttons,
PresenterPOD etc…
