Installation and connection
32
20901334_EN-US_PC3000 VARIO select Serie_V1.4_061022
4.2 Installation
NOTICE
Condensate can damage the electronics.
A large difference in temperature between the storage location
and the installation site can lead to the formation of condensate.
ð
After receipt or storage, allow your vacuum to acclimatize for at
least 3–4 hours before putting it into operation.
Checking the installation conditions
Calibrating the in-
stallation conditions
n
The device is acclimatized.
n
The ambient conditions are met and lie within the limitations of
use.
n
The pump must installed on a stable and secure floor, with no
other mechanical contact apart from the pump feet.
Installing the vacuum pump
-> Example
Sketch of minimum
distances in labora-
tory furniture
ð
Place the vacuum pump on a stable, vibration-free, level sur-
face.
ð
When installing laboratory furniture, maintain the minimum
distance of 5 cm (2 in.) to adjacent objects or surfaces.
ð
Avoid heat accumulation and ensure sufficient air circulation,
especially in closed housings.
