vacuubrand PC 3002 VARIO select Instructions For Use Manual Download Page 30

Page: 30 / 88

Installation and connection

20901334_EN-US_PC3000 VARIO select Serie_V1.4_061022

Installation and connection

4.1 Transport

Products from

VACUUBRAND

are packaged in stable, recyclable

packaging.

The original packaging is customized to your product for safe
transport.

If possible, keep the original packaging, e.g. for sending in for re-
pairs.

Incoming goods

Check the delivery immediately after receipt for any transport
damage and for completeness.

Promptly report transport damage to the supplier in writing.

Unpacking

-> Example

Pumping unit in orig-

inal packaging

Glass flask in en-

closed box

1. Remove the connections from the glass flask, such as hose noz-

zles and screw fasteners.

2. Compare the scope of delivery with the delivery notice.

Summary of Contents for PC 3002 VARIO select

























































































Search results

Summary of Contents for PC 3002 VARIO select

Reviews:

Related manuals for PC 3002 VARIO select

Brands by name

Popular brands

vacuubrand PC 3002 VARIO select, Instructions For Use Manual

Search results

Summary of Contents for PC 3002 VARIO select

Reviews:

Related manuals for PC 3002 VARIO select

Brands by name

Popular brands