1
MODEL VSLS400
INSTALLATION MANUAL
If you have any questions, please call us at 860 469 2580
Do not use the VacuSeal in high wind conditons. Injury from the
spa cover being blown over and impactng the spa user can occur.
Hot Tub Products, LLC
• 2 Toelles Road, Suite 13, Wallingford CT 06492 • Email:
Figure 1
Figure 2
SPAS NOT SUITABLE FOR INSTALLATION
IMPORTANT: SPAS WITH A RADIUS ABOVE 12”
If your spa has a radius corner over 12” and up
to 17” you must install the optional VacuSeal
Extended Bracket System Part #VSLAESA.
See “Optional Accessories” It includes 2 brackets
that add support to the primary Mounting Brackets
This is an optional part that comes independently
packaged for large radius spas.
The VacuSeal Trademark along with US Patent Nos. 8,468,617, 8,479,325, 8,516,625, and 8,516,626, plus
other US & Foreign Patents Pending are owned by Hot Tub Products LLC
IMPORTANT FOR SWIM SPAS ONLY
Installing the VacuSeal System on Swim Spas
includes multiple covers and 2 lifters. The
installation is no different than a VacuSeal
System on a traditional hot tub but requires you
to follow these steps.
1. Install one VacuSeal Lifter & Cover on one
side of the swim spa before installing the
second Lifter.
2. After the first Cover is installed push the
second cover firmly against it during the
final positioning process to prevent a gap
between the two covers each time you
open and close the cover. A m.ajor benefit
to the VacuSeal System is that the cover will
always return to their original position if
installed correctly
CAUTION
1. Flush mounted spas. A minimum of 4” clearance required. See Fig 2.
3. Spas longer than 96” (8’) on both sides. For oversized covers
See “Optional Accessories”
5. Swim Spas longer than 264” (22’)
7. Round spas, or those with a corner radius larger than 17”.
To determine radius, see Figure 1.
