background image

 

CAUTION:  Do not use when rug (or floor) is wet.

ATTENTION: Ne pas utiliser lorsque le tapis (ou le plancher) est moduille.

SAVE THESE INSTRUCTIONS

-WARNING-

ELECTRIC SHOCK COULD OCCUR IF USED ON WET SURFACES

FOR CORD CONNECTED APPLIANCE

This appliance must be grounded.  If it should malfunction or breakdown, grounding 

provides a path of least resistance for electric current to reduce the risk of electric 

shock.  Your vacuum system is supplied with an electrical cord having a grounding 

pin.  It is recommended that this plug be used only with an    appropriate outlet that 

is properly installed and grounded in accordance with all local codes and ordinanc-

es.  This appliance is for use on a nominal 120-volt circuit (U.S. only) or 230/250 volt 

circuits where applicable, and has a grounded plug that looks like the plug shown 

in Figure A.  A temporary adapter, that looks like the adapter illustrated in Figure 

B, may be used to connect this plug to a 2-pole receptacle as shown in Figure B if a 

properly grounded outlet is not available.

GROUNDING INSTRUCTIONS

The temporary adapter should be used only until a properly grounded outlet (Fig-

ure A) can be installed by a qualified electrician.  

NOTE:

 

Temporary adapters are 

not permitted in Canada

.  The green colored rigid ear, lug or the like, extending 

from the adapter, must be connected to a permanent ground such as a properly 

grounded outlet box cover.  Whenever the adapter is used, it must be held in place 

by a metal screw.

DANGER--- 

GROUNDING

              PIN

GROUNDED 

OUTLET

    

Improper connection of the equipment - grounding 

conductor can result in a risk of electric shock.  Check with a qualified electrician 

or your installer if you are in doubt as to whether the outlet is properly grounded.  

Do not modify the plug provided with the appliance  -  if it will not fit the outlet 

use a temporary adaptor as shown and have a proper outlet installed by a qualified 

electrician as soon as possible.

ADAPTER

METAL 

SCREW

TAB FOR

GROUNDING SCREW

 FIGURE A

 FIGURE B

Your vacuum does not require any oil.  The bearings in the motor are greased 

and sealed for life. 

Do not add lubricant.

* THIS IS NOT A WET VAC * 

Summary of Contents for UV100













Reviews: