background image

14

EQUIPMENT LIMITED WARRANTY

To Make a Warranty Claim:

For Warranty Inquiries contact the location where you purchased the product: 

•  WebstaurantStore.com: Contact 

[email protected]

. Please have your order number ready.

•  The Restaurant Store: If you purchased this unit from your local store, please contact your store directly.
•  TheRestaurantStore.com: Online purchases, call 717-392-7261. Please have your order number ready.

Failure to contact the designated location prior to obtaining equipment service may void your warranty.

VacPak-It Ultima

 makes no other warranties, express or implied, statutory or otherwise, and 

HEREBY DISCLAIMS ALL 

IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A 
PARTICULAR PURPOSE.

This Limited Warranty does not cover: 
• 

Equipment sold or used outside the Continental United States

• 

Use of unfiltered water (if applicable)

• 

VacPak-It Ultima

 has the sole discretion on wearable parts not covered under warranty

• 

Equipment not purchased directly from an authorized dealer

• 

Equipment used for residential or other non-commercial purposes

• 

Equipment that has been altered, modified, or repaired by anyone other than an authorized service agency

• 

Equipment where the serial number plate has been removed or altered.

• 

Damage or failure due to improper installation, improper utility connection or supply, and issues resulting from 
improper ventilation or airflow.

• 

Defects and damage due to improper maintenance, wear and tear, misuse, abuse, vandalism, or Act of God.  

Any action for breach of this warranty must be commenced within 18 months of the date on which the breach occurred.

parties. The laws of the Commonwealth of Pennsylvania shall govern this warranty and the parties’ rights and duties 
under it. 

VacPak-It Ultima

 shall not under any circumstances be liable for incidental or consequential damages of any kind, 

including but not limited to loss of profits.    

VacPak-It Ultima warrants its equipment to be free from defects in material and workmanship for a period of 18 months. This is the sole 
and exclusive warranty made by VacPak-It Ultima covering your VacPak-It Ultima brand equipment. A claim under this warranty must be 
made within 

18 months from the date of purchase of the equipment. Only the equipment’s original purchaser may make a claim 

under this warranty. VacPak-It Ultima reserves the right to approve or deny the repair or replacement of any part or repair request. 
The warranty is not transferable. VacPak-It Ultima Equipment installed in/on a food truck or trailer will be limited to a period of 30 
days from the original date of purchase.

Summary of Contents for ULTIMA 186UVMC10















Reviews: