10 •
vacon
Flange mounting kit FR7-FR9
Tel358-201-2121 • Fax +358-201-212 205
4
4.
MOUNTING
MOUNTING PROCEDURE
1.
Make an opening in the cabinet door for the flange (collar) installation using the dimensions
given in Vacon NX User's manual, chapter 5.
2.
Attach the sealing tape around the opening. See Figure 1 for how to bend the tape at the corners
of the opening (1) and place the tape so that it runs
inside
the screws (2).
The kit contains a greater amount of tape than what you might need. Only use such an amount of
tape required by the dimensions of the opening.
3.
Fit the frequency converter in the opening.
NOTE: The frequency converter will not fit in the opening in a straight position. Tip the converter
positioning the lower end first in the opening. See Figures 4 and 5.
Fix the converter on the plane with the screws attached.
Figure 1
Figures 4 and 5.
