commissioning
vacon
• 15
24-hour service: +358-40-8371 150
•
Email: [email protected]
5
5.
COMMISSIONING
READ FIRST CHAPTER 8 'COMMISSIONING' IN VACON NX USER'S MANUAL (Document nr. ud00701,
please visit
http://www.vacon.com/support/documents.html
).
5.1
Fieldbus board parameters
The Vacon LonWorks board is commissioned with the control keypad by giving values to appropriate
parameters in menu M7 (for locating the expander board menu, see Vacon NX User's Manual,
Chapter 7).
Expander board menu (M7)
The
Expander board menu
makes it possible for the user 1) to see what expander boards are
connected to the control board and 2) to reach and edit the parameters associated with the expander
board.
Enter the following menu level (G#) with the
Menu button right
. At this level, you can browse through
slots A to E with the
Browser buttons
to see what expander boards are connected. On the lowermost
line of the display you also see the number of parameter groups associated with the board.
If you still press the
Menu button right
once you will reach the parameter group level including one
parameter
(Service pin)
.
LonWorks parameters
To commission the LonWorks board, enter the parameter G7.5.1.1 from the
Parameters
group
(G7.5.1). Give the desired value to the LonWorks parameter.
# Name
Default
Range
Description
1
Service Pin
0
0..1
Broadcasts a service pin message to the
network.
Table 5-1. LonWorks parameters
Archived Document
