INTRODUCTION
vacon • 7
24-hour s358 (0)201 212 575 • Email: [email protected]
2
2.
INTRODUCTION
The Vacon NXC is a product range of free standing enclosed frequency converters for the high
power range. The NXC is a modular product intended for use in all applications where reliability and
high availability is appreciated.
This manual gives the basic information required to successfully perform installation and basic
commissioning. Due to the high amount of options available, not all possible variations are
described in this manual. For more information, refer to delivery-specific documentation. This
manual assumes good competence in installation and commissioning skills.
In the All in One Application Manual you will find information about the different applications
included in the All in One Application Package. Should these applications not meet the
requirements of your process please contact the manufacturer for information on special
applications.
Information on the installation of the drive in a cabinet can be found in manuals 'NXP Frequency
Converters, IP00 Module Installation, Frames FR10 to FR14 (ud00908) as well as Frequency Inverter
(UD01063) and Active Front End (UD01190) manuals.
This manual is available in both paper and electronic editions. We recommend you to use the
electronic version if possible. If you have the electronic version at your disposal you will be able to
benefit from the following features:
The manual contains several links and cross-references to other locations in the manual which
makes it easier for the reader to move around in the manual, to check and find things faster.
The manual also contains hyperlinks to web pages. To visit these web pages through the links you
must have an internet browser installed on your computer.
In case you are in doubt about your ability to perform installation or commissioning,
do not proceed. Contact your local Vacon partner for advice.
For the NXC low-harmonic drive also see the AFE application manual.
13006.emf
