Vacon 100 INDUSTRIAL, User Manual

Page: 30 / 56

5
vacon • 28 Fiedlbus parametrization
Local contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/
5.3.4 Fixed Subnet Mask
The network mask marks all the bits of an IP address for the identification of the network and the
subnetwork.
5.3.5 Fixed default gateway
Gateway address is the IP address of a network point that acts as an entrance to another network.
5.3.6 Active IP address, subnet mask and default gateway
This value cannot be changed. If the IP mode is "fixed", it will display the same value as in Fixed IP
address (5.3.3). If the mode is "DHCP", the value is 0.0.0.0 when the DHCP is retrieving IP settings
or 169.x.x.x if it could not retrieve an address. Otherwise it shows the currently active IP address.
5.3.7 MAC Address
The MAC address of the control board. The MAC address (Media Access Control) is a unique address
given to each network host. It is not editable.
5.3.8 Modbus TCP/UDP settings (M5.9.2)
The monitoring values menu structure is duplicated to all connections. Maximum number of
connections is three (3). Monitoring menus are visible even though connection has not been opened.
Table 13. Modbus TCP/UDP parameters
Panel Tree Parameter Range Default ID Description
P5.9.2.1.1 Connection limit 0…3 3 2446 Number of allowed connections
P5.9.2.1.2
Unit identifier
number
0…255 255 2447 See Chapter 5.2.10
P5.9.2.1.3
Communication
time-out
0…65535 10 2448
Unit is seconds
0 = Not used
P5.9.2.1.4.1-30 IDMap IDs 0…65535 0
3100-
3129
IDMap IDs
Table 14. Modbus TCP/UDP Monitoring values
Panel Tree Parameter Range Unit Default ID Description
P5.9.2.2.1.1
Fieldbus protocol
status
1…3 - - 2449
1 = Stopped
2 = Operational
3 = Faulted
See 5.2.8
P5.9.2.2.1.2
Communication
status
0.0…99.9999 - 0.0 2450
0-99 Number of messages
with errors
0-999 Number of messages
without communication
errors
See 5.2.9
P5.9.2.2.1.3 Illegal functions 0…65535 - - 2451 See 5.2.10
P5.9.2.2.1.4
Illegal data
addresses
0…65535 - - 2452 See 5.2.11