8
POLARIZED PLUG
To reduce the risk of electrical shock, this appliance has a polarized plug (one blade wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
MOUNTING THE VACUUM ONTO THE RACK
1. Measure the distance from the top screw hole of the mounting rack to the closest electrical
outlet and add 12 inches. This is the amount of cord needed; wind the excess power cord
around the cord wrap area located on the rear of the vacuum. (fig. 8)
2. Make sure the cord is not wrapped around the vac hanging hook (A). (fig. 9)
3. Mount the vacuum onto the mounting rack by aligning the vac hanging hook (A) with slot (B) on
the mounting rack and slide downward until it locks. When trying to mount vac onto the rack ,
please hold the plug and make sure the cable is not hanging between rack and the back of the
vac. (fig. 10)
4. Attach the accessory storage caddy on either side of the vac onto the hooks provided. (fig.11)
5. Your vacuum comes ready for dry vacuum cleaning. For installation instructions, see page 13.
(fig. 12 & 13)
6. For wet vacuum cleaning, install the supplied foam wet filter. (fig. 14) For installation
instructions, see page 13.
7. Place the power head back on the collection tank, and secure into place using the 2 side
latches. (fig. 15 & 16)
8. Insert the locking end of the hose into the vacuum port on the collection tank and lock into place.
(fig. 17)
9. Push the required attachment onto the free end of the hose. (fig. 18)
1. Disconnect the power cord form the electrical outlet. (fig. 1)
2. Press the release lever with your left hand. (fig. 2)
3. Lift the vacuum up and out of the rack by the handle with your right hand. (fig. 3)
DISMOUNTING THE VACUUM FROM THE RACK
Summary of Contents for VWM510
Page 16: ...16 EXPLODED VIEW ...
