Vacmaster RESPIRA UC0412EUK, Manual

Page: 15 / 24

15
GB
PROBLEM POSSIBLE CAUSE SOLUTION
Dust bin is not installed correctly.
Check dust bin for correct installation
and ensure it is snapped firmly in
place.
The hose or attachments are not
installed correctly.
Check the hose and attachments for
correct installation and ensure they
are snapped firmly in place.
Suction control is in open position.
Adjust the suction control to increase
suction. Follow instructions on page
10.
Dust escapes from
the vacuum.
HEPA exhaust filter is damaged
and needs to be replaced.
Replace the exhaust filter. To
purchase online at www.cleva-
europe.com.
Dust bin is installed incorrectly.
Position dust bin correctly and snap
firmly in place.
HEPA exhaust filter is installed
incorrectly.
Check exhaust filter for correct
installation. Follow instructions on
page 12.
Brushroll does not
spin.
Brushroll is jammed.
Turn off and unplug vacuum cleaner,
remove obstruction, then turn on the
vacuum cleaner.
Brushroll is not installed correctly. Contact the after sales helpline for
assistance.
The belt is worn or broken.
Contact the after sales helpline for
assistance.
The belt is not routed correctly.
Contact the after sales helpline for
assistance.
Fault in PCB section of the
motorised nozzle.
Contact the after sales helpline for
assistance.
Overheat protector of the
motorised nozzle is activated.
Wait the motorised floor head to cool
down, and then restart.
Sound changes.
Attachments in use restrict air
flow.
Check attachments for fuzz, lint, pet
hair or other debris.
Blocked air path.
Check for and remove any clogs and
clean the hose.
HEPA exhaust filter is installed
incorrectly.
Check exhaust filter and the exhaust
filter cover for correct installation.
Ensure the filter cover is snapped
firmly in place.