Vacmaster RESPIRA UC0412EUK, Manual

Page: 12 / 24

12
GB
NOTE:
Make sure dust bin is free of debris before opening.
1) Remove the dust bin.
2) Press the dust bin lid release button (Fig. 23).
3) Grasp the pre-filter (
6
) and rotate counterclockwise (Fig. 24).
4) Clean pre-filter by gently tapping.
NOTE:
If necessary, rinse with cold water only. DO NOT use detergent or soap. Allow parts to dry
24 hours before putting back into vacuum cleaner. DO NOT wash in the dishwasher. DO NOT
install damp.
5) Place the pre-filter back into the dust bin and rotate clockwise to lock into place.
6) Reinstall the dust bin into the main body.
5. Pre-Motor Filters
Regularly rinse the filters to maintain your vacuum's suction power.
Rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling
them to prevent liquid from being drawn into electronic parts.
NOTE:
When the cleaning of filters no longer restores vacuum cleaner suction to full power, or the
filters are worn or broken, replace the filters. To purchase filters, contact the After Sales Helpline.
It is recommended to clean the foam and felt filters with cold water every three months.
1) With the dust bin removed, take out the foam (
7
) and felt filter (
8
) (Fig. 25).
2) Wash with cold water only. DO NOT use detergent or soap. Allow all filters to air dry before
reinstalling.
NOTE:
DO NOT operate without foam and felt filters installed. DO NOT wash in the dishwasher.
DO NOT install foam and felt filters if damp.
6. HEPA Exhaust Filter
It is recommended to clean the HEPA exhaust filter with cold water every year.
1) Remove the exhaust filter cover by pressing the release tab (
9
) at the bottom of the cover.
Remove the HEPA exhaust filter (
10
) together with the foam filter (
11
) (Fig. 26).
2) Wash with cold water only. DO NOT use detergent or soap. Allow to air dry. Allow parts to air
dry before putting back into vacuum cleaner.
NOTE: DO NOT operate without exhaust filter installed. DO NOT wash in the dishwasher. DO
NOT install the filter if damp.
3) Replace the foam filter to the HEPA exhaust filter first. Then replace the HEPA exhaust filter
with foam filter into the vacuum cleaner.
4) Insert the exhaust filter cover tabs (
12
) into the upper slots (
13
) and lock the filter cover into
place by pressing the lower part of the cover until a click is heard (Fig. 27).
7. WrapFree Brushroll
The motorised floor head is fitted with a WrapFree brushroll, which actively removes the hair from
the brushroll when vacuuming.