Vacmaster RESPIRA UC0412EUK, Manual

Page: 10 / 24

10
GB
The brushroll indicator status light:
Colour Status
Green The brushroll is spinning and working as intended.
Red
There is a jam in the brushroll area. Turn off and unplug
the vacuum. Remove any blockages in the nozzle.
No Light The brushroll is not active.
ABOVE FLOOR MODE
1) Place the vacuum cleaner in the upright locked position.
2) Release the flexible hose and/or extension wand (Fig. 12).
3) Choose the desired extension wand/attachments (Fig. 13).
CAUTION: When using attachments, be careful not to over stretch the suction hose to avoid
causing the vacuum cleaner to tip over.
3. Attachments
NOTE:
All accessories are compatible with both the flexible hose and extension wand. Included
accessories will vary by model.
1) 3-in-1 Combination Tool
Use crevice tool for cleaning in tight spaces (Fig. 14).
Use the dusting brush mode by sliding the adapter towards the end of the tool (Fig. 15). Ensure
the locking button (
4
) is engaged. Use the dusting brush for cleaning loose or delicate surfaces.
Press the locking button to remove the tool adaptor. Remove and flip the adapter to use the
upholstery brush (Fig. 16). Use in upholstery brush for cleaning fabric surfaces.
To return the combination tool to crevice tool mode, press the locking button and slide the adaptor
back down the tool.
2) Pet Mate (only for UC0413EUK)
Use Pet Mate to pick up pet hair and loose debris. Rotating brushroll powerfully, deep cleans
dander out of upholstery and other surfaces (Fig. 17).
WARNING: Never use the Pet Mate directly on pets.
CAUTION: Moving parts! To reduce the risk of personal injury, DO NOT touch the brushroll
when vacuum cleaner is on. Contacting the brushroll while it is rotating can cut, bruise or
cause other personal injuries.
3. Suction Control
The suction control is located on the flexible hose. This allows you to adjust the suction
performance depending on the floor type.
Rotate to “+” to increase suction.
Rotate to “-” to reduce suction and increase maneuverability (Fig. 18).