Vacmaster DVTB2015, Operator'S Manual

Page: 11 / 22

11
GB GB
UNPACKING AND CHECKING CARTON
CONTENTS
1 Vacuum Intake Port 12 On/Off Switch
2 Carry Handle 13 Battery Bay
3 Cover Latches 14 Washable Wet/Dry Cartridge Filter (x2)
4 Hose Storage 15 38mm to 32mm Hose Nozzle Adapter
5 Collection Tank Latches 16 Inflator Nozzle Adapter
6 Collection Tank 17 Dusting Brush Adapter
7 Blower Port 18 Rubber Upholstery Adapter
8 Extension Wand Storage 19 Charger
9 Adaptable Utility Nozzle 20 Battery
10 Crevice Tool 21 Shoulder Strap
11 Battery Bay Cover 22 Suction Hose
ASSEMBLY
1. Assembly Preparation
1) Verify that the battery pack is not installed and un-clip the main latches to release the collection
tank and remove the power head.
2) Remove the contents; make sure you have all contents as listed on page 7.
3) Your vacuum cleaner comes ready for operation with a cartridge filter pre-installed. If the
cartridge filter is not installed, refer to page 8 for filter installation instructions.
2. Installing & Removing the Suction Hose
1) Remove one end of the hose from the storage position (Fig. 1).
2) Ensure the other end of the hose is connected to the vacuum intake port.
3. Installing & Removing Accessories
1) To remove the extension wands, pull each wand from its storage slot (Fig. 2).
2) Choose the desired accessories and push fit onto the hose nozzle (Fig. 3).